READY TO BOOT?
Don't rush the excitement. Follow these steps to ensure your Xorig machine is set up for peak performance.
01Unbox Safely
Place the box on a flat surface. Avoid cutting deep with sharp objects. Locate accessories box first.
02Remove Internal Instapak
WARNING: Your PC has internal foam padding (Instapak) inside the glass panel. Gently remove the glass panel, pull out the expanding foam carefully, then reattach the glass.
03Connect Monitor (Correctly!)
CRITICAL: Connect your HDMI/DisplayPort cable directly into the GRAPHICS CARD (horizontal slots usually lower down), NOT the motherboard (vertical slots top left). Connecting to the motherboard will give no display on most gaming PCs.
Most common mistake - Check twice!
04Power On
Flip the PSU switch at the back to 'I' (On). Press the power button on the top/front of the case.
05Connect & Update
Attach the Wi-Fi antenna (if included) to the back gold connectors. Connect to internet. Windows is pre-activated, just let it update drivers.
Still Stuck?
Don't force anything, bhai. If you're unsure, message us. We'll hop on a video call to guide you.
Live Video Support